Working principle and features:The fan coil unit (FCU as below) have no energy itself but through pipeline of central air conditioner supplying with chilled or cooled water into the copper tube of heat exchanger inside house, and the fan blow through the heat exchanger to cool or heat the temperature of the house. The FCU is characterized with energy-saving, high efficiency, low noise, reliable and convenient to select and install.    Application scope   The unit is wide

Working principle and features:The fan coil unit (FCU as below) have no energy itself but through pipeline of central air conditioner supplying with chilled or cooled water into the copper tube of heat exchanger inside house, and the fan blow through the heat exchanger to cool or heat the temperature of the house. The FCU is characterized with energy-saving, high efficiency, low noise, reliable and convenient to select and install.    Application scope   The unit is wide

Main functions and features: Fuse Action at 70'C, valves shut down automatically Manual closed and opened, the opening angle is not adjustable Closed signal outputs to chain-closed ventilation equipment Specifications (L * W * H): 210 * 100 * 100 ~ 500 * 320 ** 210 mm Structure: Valve, bushings, control unit Technical parameters: Temperature sensor movements at 70'C Refractory time: 1.5 hours Air volume: 290 CBM / H * SM standard state Full drag coefficient at: <0.4

Central air conditioner

FK-R Air Grill: Alloy shaped by mould, and treat after spray process, nylon filter. It is usually used to commercial places

The product synopsis Air exchanger is one kind of system to treat feculent air by the filtration, the purification, the heat exchanging processing evacuation, simultaneously handle the fresh air after the filtration, the purification, the heat change processing to keep indoor temperature unchanged to realize inside and outside air change bidirectional. The new air isometric replacement is one kind of high tech product with highly effective energy conservation, the environmental protection Unit h

PYK-SMD Normally closed, DC24V signal to open Closed signal outputs to chain-closed ventilation equipmentSpecifications (L * W * H): 350 * 350 ~ 1000 * 1000 mm The main structure: Valve and the valve, the implementing agencies Technical parameters: Open the voltage / current: DC24V/0.5A Close voltage / current: DC24V/0.6A after 20s Reset Torque: 1500 N / cm

Working principle and features:The fan coil unit (FCU as below) have no energy itself but through pipeline of central air conditioner supplying with chilled or cooled water into the copper tube of heat exchanger inside house, and the fan blow through the heat exchanger to cool or heat the temperature of the house. The FCU is characterized with energy-saving, high efficiency, low noise, reliable and convenient to select and install.    Application scope   The unit is wide

Working principle and features:The fan coil unit (FCU as below) have no energy itself but through pipeline of central air conditioner supplying with chilled or cooled water into the copper tube of heat exchanger inside house, and the fan blow through the heat exchanger to cool or heat the temperature of the house. The FCU is characterized with energy-saving, high efficiency, low noise, reliable and convenient to select and install.    Application scope   The unit is wide

GK Series cabinet air conditioning unit, referencing JB/T9066-1999 standards, was state of the art air-conditioning units developed to meet user requirements. According to user requirements, heating, cooling, humidification, filtration sterilization, and other evolutionary function can easily be realized. It is widely used in hotels, shopping malls, airports, hospitals, office buildings and other public buildings. It also can be used for the industries of electronics, textiles, chemicals, pharma

GK Series cabinet air conditioning unit, referencing JB/T9066-1999 standards, was state of the art air-conditioning units developed to meet user requirements. According to user requirements, heating, cooling, humidification, filtration sterilization, and other evolutionary function can easily be realized. It is widely used in hotels, shopping malls, airports, hospitals, office buildings and other public buildings. It also can be used for the industries of electronics, textiles, chemicals, pharma

VDL Diffuser:In terms of cooling or heating, air supply perspective can be achieved by adjusting the blades angle. Because of large scale of wind blowing, it can be suitable for industrial plants or senior activities centers, as well as public places (such as: industrial plants, airports, theaters, bank etc.) Structure: VDL has four different specifications, positive outlets equip with adjustable blades and flow laps. The leaves can be manually adjusted, or by pneumatic device or electrical devi

Central air conditioner

Central air conditioner

Central air conditioner

FK-WF external waterproof Air Grill:External waterproof outlet as an external walls air grill, its structure has the advantage of resisting rain to splash into the internal facility,

FK-WF external waterproof Air Grill:External waterproof outlet as an external walls air grill, its structure has the advantage of resisting rain to splash into the internal facility,

FK-FZ, FK-FC, FK ¨C FS Air Grill :Square intake includes FK-FZ,FK-FC, and FK - FS. FK-FZ&FK-FC are the blower for four directions; FK-FS is a kind of lower for three directions. The leaves are fixed at 45 degree angle.

FK-FZ, FK-FC, FK ¨C FS Air Grill :Square intake includes FK-FZ,FK-FC, and FK - FS. FK-FZ&FK-FC are the blower for four directions; FK-FS is a kind of lower for three directions. The leaves are fixed at 45 degree angle.

FK - DG Air Grill:Integrated air return, decoration, maintenance intake into one unit, it can be opened easily to clean strainer, using hinge frame structure.

FK - DG Air Grill:Integrated air return, decoration, maintenance intake into one unit, it can be opened easily to clean strainer, using hinge frame structure.

Ball Spout : Performance and specifications Spherical adjustable intake can be divided into 10 kinds of specifications, which is suitable for air conditioner, workshop etc. By adjusting the control unit to achieve the satisfied air flow volume. 30%T/T as deposit to our account before production,70% balance against to our account within 5 work days after delivery

Ball Spout : Performance and specifications Spherical adjustable intake can be divided into 10 kinds of specifications, which is suitable for air conditioner, workshop etc. By adjusting the control unit to achieve the satisfied air flow volume. 30%T/T as deposit to our account before production,70% balance against to our account within 5 work days after delivery

FK-R Air Grill: Alloy shaped by mould, and treat after spray process, nylon filter. It is usually used to commercial places

FK-R Air Grill: Alloy shaped by mould, and treat after spray process, nylon filter. It is usually used to commercial places

FP-LM

Instruction Working principle and features:The fan coil unit (FCU as below) have no energy itself but through pipeline of central air conditioner supplying with chilled or cooled water into the copper tube of heat exchanger inside house, and the fan blow through the heat exchanger to cool or heat the temperature of the house. The FCU is characterized with energy-saving, high efficiency, low noise, reliable and convenient to select and install. Model:FP-WA series horizontal inside type FCU have r

Main functions and features: Fuse Action at 280 ¡æ, valves shut down automatically Manual closed and opened, the opening angle is not adjustable Closed signal outputs to chain-closed ventilation equipment Specifications (L * W * H): 400 * 400 * 250 ~ 2000 * 1250 ** 2510 mm Structure: Valve, bushings, control unit Technical parameters: Working voltage / current: DC24V 0.7A  Refractory time: 1.5 hours Air volume: 290 CBM / H * SM standard state Full drag coefficient at: <0.4

Main functions and features: Fuse Action at 70 ¡æ, valves shut down automatically Manual closed and opened, the opening angle is not adjustable Closed signal outputs to chain-closed ventilation equipment Specifications (L * W * H): 250 * 150 * 1500 ~ 2000 * 1250 ** 250 mm Structure: Valve, bushings, control unit Technical parameters: Temperature sensor movements at 70 ¡ã C Refractory time: 1.5 hours Air volume: 290 CBM / H * SM standard state Full drag coefficient at: <0.4